José Manuel Córdoba Gallego
Telefono: 954550122
Email: Solicitar correo
Perfil en ORCID: 0000-0003-1699-7928
Perfil en WOS: B-1029-2011
Perfil en Scopus: 26538552800

Grupo de Investigación: Foto-Catalisis Heterogenea: Aplicaciones
Departamento/Unidad: Química Inorgánica
Situación profesional: Profesor Titular de Universidad

Participa en los siguientes proyectos/ayudas en la US:

• Proyecto de investigación:
  • Los elementos químicos están de moda. Baile de disfraces de la Tabla Periódica (FCT-18-13170 - Investigador)
  • Obtención y caracterización termomecánica de laminados cermet / metal duro (P12-TEP-2622 - Investigador)
  
  
• Contrato con empresas (Arts. 68/83 LOU):
  • Economía Circular aplicada a la producción eficiente de Biocombustibles y Bioenergía (4031/0580 - Equipo Trabajo (Solicitud))
  • Zonificación vitícola de Sierras de Málaga. 1. Términos de Ronda y Arriate (OG-067/02 - Becario)
  
  

Participación en proyectos externos:

• Development of biochar based heterostructured materials with photofuntional properties for applications in water decontamination and disinfection processes (Consejo Superior de Investigaciones Científicas)

Cobertura de la base de datos de proyectos, véase aqui

Publicaciones:

Capítulos en Libros

Gallardo Lopez, A., Morales Rodríguez, Ana, Dominguez Rodriguez, Arturo, Córdoba Gallego, José Manuel, Aviles, M a, et. al.:
Comportamiento Plástico en Compresión Uniaxial de Cermets Ti(C,N)-CO. Pag. 67-68. En: Pms 2008. Actas del XI Congreso Nacional de Propiedades Mecánicas de Sólidos. Cádiz, España. Servicio de Publicaciones de la Universidad de Cadiz. 2008. ISBN 978-84-9828-212-2

Publicaciones en Revistas

Puga , Felipe Rubén, Navio Santos, Jose Antonio, Córdoba Gallego, José Manuel, Romero Sarria, Francisca, Hidalgo Lopez, Maria Carmen:
Insights into the structural and physicochemical properties of Zn-Bi-O composites for efficient photodegradation of caffeic acid, rhodamine B and methyl orange. En: Applied Surface Science. 2022. Vol. 581. 10.1016/j.apsusc.2021.152351

Puga , Felipe Rubén, Navio Santos, Jose Antonio, Paulete Romero, María Angeles, Córdoba Gallego, José Manuel, Hidalgo Lopez, Maria Carmen:
Exploring the photocatalytic activities of a highly {001} faceted TiO2 sensitized by coupling with AgBr or Ag3PO4. En: Materials Science & Engineering B: Solid-State Materials for Advanced Technology. 2022. Vol. 276. 10.1016/j.mseb.2021.115555

Real Pérez, Concepción, Alcalá González, María Dolores, Córdoba Gallego, José Manuel:
Fabrication and characterization of FeCoNiCrMn,(Al) high entropy alloy based (Ti,Ta,Nb)(C,N) cermet. 2021. Vol. 101. https://doi.org/10.1016/j.ijrmhm.2021.105694

Real Pérez, Concepción, Alcalá González, María Dolores, Córdoba Gallego, José Manuel:
Fabrication and characterization of FeCoNiCrMn,(Al) high entropy alloy based (Ti,Ta,Nb)(C,N) cermet. En: International Journal of Refractory Metals and Hard Materials. 2021. Vol. 101. Pag. 105694-105702. https://doi.org/10.1016/j.ijrmhm.2021.105694

Aviles Escaño, Miguel Angel, Córdoba Gallego, José Manuel, Sayagués de Vega, Maria Jesús, Gotor Martínez, Francisco José:
Synthesis of Mn2+-doped ZnS by a mechanically induced self-sustaining reaction. En: Journal of Materials Science. 2020. Vol. 55. Pag. 1603-1613. 10.1007/s10853-019-04138-8

Aviles Escaño, Miguel Angel, Córdoba Gallego, José Manuel, Sayagués de Vega, Maria Jesús, Gotor Martínez, Francisco José:
Tailoring the Band Gap in the ZnS/ZnSe System: Solid Solutions by a Mechanically Induced Self-Sustaining Reaction. En: Inorganic Chemistry: including bioinorganic chemistry. 2019. Vol. 58. Pag. 2565-2575. 10.1021/acs.inorgchem.8b03183

Azancot, Lola, Bobadilla Baladrón, Luis Francisco, Córdoba Gallego, José Manuel, Centeno Gallego, Miguel Angel, Odriozola Gordon, José Antonio:
Influence of the preparation method in the metal-support interaction and reducibility of Ni-Mg-Al based catalysts for methane steam reforming. En: International Journal of Hydrogen Energy. 2019. Vol. 44. Pag. 19827-19840. https://doi.org/10.1016/j.ijhydene.2019.05.167

Borrego, Elena, Iglesias Nicasio, Antonio, Alvarez Gonzalez, Eleuterio, Montilla Ramos, Francisco J., Córdoba Gallego, José Manuel, et. al.:
Synthesis and structural characterization of homochiral coordination polymers with imidazole-based monocarboxylate ligands. En: Dalton Transactions. 2019. Vol. 48. Pag. 8731-8739. 10.1039/C9dt01237k

Tang, Yun, Lopez Cartes, Carlos, Aviles Escaño, Miguel Angel, Córdoba Gallego, José Manuel:
Isosymmetric structural phase transition of the orthorhombic lanthanum gallate structure as a function of temperature determined by Rietveld analysis. En: CrystEngComm. 2018. Vol. 20. Núm. 37. Pag. 5562-5569. 10.1039/c8ce00726h

Alcalá González, María Dolores, Real Pérez, Concepción, Fombella, I, Trigo, I, Córdoba Gallego, José Manuel:
Effects of milling time, sintering temperature, al content on the chemical nature, microhardness and microstructure of mechanochemically synthesized FeCoNiCrMn high entropy alloy. En: Journal of Alloys and Compounds. 2018. Vol. 749. Pag. 834-843

Córdoba Gallego, José Manuel, Alcalá González, María Dolores:
Synthesis and characterization of SiC/Si3N4 composites from rice husks. En: Ceramics International. 2018. Vol. 44. Pag. 14645-14651. 10.1016/j.ceramint.2018.05.090

Chicardi Augusto, Ernesto, Gotor Martínez, Francisco José, Alcalá González, María Dolores, Córdoba Gallego, José Manuel:
Effects of additives on the synthesis of TiCxN1-x by a solid-gas mechanically induced self-sustaining reaction. En: Ceramics International. 2018. Vol. 44. Núm. 7. Pag. 7605-7610. 10.1016/j.ceramint.2018.01.179

Velo, Irene L, Gotor Martínez, Francisco José, Alcalá González, María Dolores, Real Pérez, Concepción, Córdoba Gallego, José Manuel:
Fabrication and characterization of WC-HEA cemented carbide based on the CoCrFeNiMn high entropy alloy. En: Journal of Alloys and Compounds. 2018. Vol. 746. Pag. 1-8

Córdoba Gallego, José Manuel, Ponce, Manuel, Sayagués de Vega, Maria Jesús:
Structure evolution in the LaMn1¿xFexO3+¿ system by Rietveld analysis. En: Solid State Ionics: Diffusions and Reactions. 2017. Vol. 303. Pag. 132-137. 10.1016/j.ssi.2017.02.020

Chicardi Augusto, Ernesto, Gotor Martínez, Francisco José, Alcalá González, María Dolores, Córdoba Gallego, José Manuel:
Influence of milling parameters on the solid-gas synthesis of TiCxN1¿x by mechanically induced self-sustaining reaction. En: Powder Technology. 2017. Vol. 319. Pag. 12-18. 10.1016/j.powtec.2017.06.035

Chicardi Augusto, Ernesto, Córdoba Gallego, José Manuel, Gotor Martínez, Francisco José:
High temperature oxidation resistance of (Ti,Ta)(C,N)-based cermets. En: Corrosion Science. 2016. Vol. 102. Pag. 125-136. http://dx.doi.org/10.1016/j.corsci.2015.10.001

Chicardi Augusto, Ernesto, Córdoba Gallego, José Manuel, Gotor Martínez, Francisco José:
Kinetics of high-temperature oxidation of (Ti,Ta)(C,N)-based cermets. En: Corrosion Science. 2016. Vol. 102. Pag. 168-177. http://dx.doi.org/10.1016/j.corsci.2015.10.006

Chicardi Augusto, Ernesto, Gotor Martínez, Francisco José, Medri, V., Guicciardi, S., Lascano, S., et. al.:
Hot-pressing of (Ti, Mt)(C,N)¿Co¿Mo2C (Mt = Ta,Nb) powdered cermets synthesized by a mechanically induced self-sustaining reaction. En: Chemical Engineering Journal. 2016. Vol. 292. Pag. 51-61. http://dx.doi.org/10.1016/j.cej.2016.02.007

Chicardi Augusto, Ernesto, Torres Hernández, Yadir, Sayagués de Vega, Maria Jesús, Medri, V., Melandri, C., et. al.:
Aumento de la tenacidad de fractura en cermets basados en carbonitruro de titanio mediante la adición de grafito. En: Anales de Mecánica de la Fractura. 2015. Vol. 32. Pag. 273-278

Gonzalez, Lm, Gotor Martínez, Francisco José, Bermejo, Raul, Chicardi Augusto, Ernesto, Córdoba Gallego, José Manuel, et. al.:
DISEÑO Y FABRICACIÓN DE LAMINADOS TIPO Ti(C,N)-Co/WC-Co CON UN POTENCIAL EQUILIBRIO DE PROPIEDADES EN SERVICIO. En: Anales de Mecánica de la Fractura. 2015. Vol. 32. Pag. 279-284

Hvizdos, Pavol, Balko, Jan, Córdoba Gallego, José Manuel, Chicardi Augusto, Ernesto:
Nanoindentation of (Ti,Ta)(C,N)¿Co cermets prepared by methods of mechanochemistry. En: International Journal of Refractory Metals and Hard Materials. 2015. Vol. 49. Pag. 219-224. http://dx.doi.org/10.1016/j.ijrmhm.2014.07.038

Chicardi Augusto, Ernesto, Torres Hernández, Yadir, Sayagués de Vega, Maria Jesús, Medri, V., Melandri, C., et. al.:
Toughening of complete solid solution cermets by graphite addition. En: Chemical Engineering Journal. 2015. Vol. 267. Pag. 297-305. http://dx.doi.org/10.1016/j.cej.2015.01.022

Balko, Jan, Hvizdos, Pavol, Córdoba Gallego, José Manuel, Chicardi Augusto, Ernesto:
Instrumented Indentation of Composite Materials Prepared by Methods of Mechanochemistry. En: Key Engineering Materials. 2014. Vol. 606. Pag. 241-244. 10.4028/www.scientific.net/KEM.606.241

Chicardi Augusto, Ernesto, Gotor Martínez, Francisco José, Córdoba Gallego, José Manuel:
Enhanced oxidation resistance of Ti(C,N)-based cermets containing Ta. En: Corrosion Science. 2014. Vol. 84. Pag. 11-20. http://dx.doi.org/10.1016/j.corsci.2014.03.007

Gotor Martínez, Francisco José, Bermejo Moratino, Raúl, Córdoba Gallego, José Manuel, Chicardi Augusto, Ernesto, Medri, Valentina, et. al.:
Processing and characterisation of cermet/hardmetal laminates with strong interfaces. En: Materials & Design. 2014. Vol. 58. Pag. 226-233. 10.1016/j.matdes.2014.01.076

Sayagués de Vega, Maria Jesús, Aviles Escaño, Miguel Angel, Córdoba Gallego, José Manuel, Gotor Martínez, Francisco José:
Self-propagating combustion synthesis by MSR: An efficient and simple method to produce (Ti, Zr, Hf)B2-Al2O3 powder nanocomposites. En: Powder Technology. 2014. Vol. 256. Pag. 244-250. http://dx.doi.org/10.1016/j.powtec.2014.02.031

Chicardi Augusto, Ernesto, Torres Hernández, Yadir, Córdoba Gallego, José Manuel, Hvizdo?, P., Gotor Martínez, Francisco José:
Effect of tantalum content on the microstructure and mechanical behavior of cermets based on (TixTa1x)(C0.5N0.5) solid solutions. En: Materials & Design. 2014. Vol. 53. Pag. 435-444. 10.1016/j.matdes.2013.07.039

Córdoba Gallego, José Manuel, Chicardi Augusto, Ernesto, Poyato Galán, Rosalía, Gotor Martínez, Francisco José, Medri, Valentina, et. al.:
Spark plasma sintering of TixTa1xC0.5N0.5-based cermets: Effects of processing conditions on chemistry, microstructure and mechanical properties. En: Chemical Engineering Journal. 2013. Vol. 230. Pag. 558-566. 10.1016/j.cej.2013.06.104

Chicardi Augusto, Ernesto, Torres Hernández, Yadir, Córdoba Gallego, José Manuel, Sayagués de Vega, Maria Jesús, Rodriguez Ortiz, Jose Antonio, et. al.:
Effect of sintering time on the microstructure and mechanical properties. En: International Journal of Refractory Metals and Hard Materials. 2013. Vol. 38. Pag. 73-80. 10.1016/j.ijrmhm.2013.01.001

Córdoba Gallego, José Manuel, Chicardi Augusto, Ernesto, Gotor Martínez, Francisco José:
Liquid-phase sintering of Ti(C,N)-based cermets. The effects of binder nature and content on the solubility and wettability of hard ceramic phases. En: Journal of Alloys and Compounds. 2013. Vol. 559. Pag. 34-38. 10.1016/j.jallcom.2013.01.046

Escalera, Edwin, Ballem, Mohamed A., Córdoba Gallego, José Manuel, Antti, Marta Elena, Odén, Magnus:
Synthesis of homogeneously dispersed cobalt nanoparticles in the pores of functionalized SBA-15 silica. En: Powder Technology. 2012. Vol. 221. Pag. 359-364. 10.1016/fj.powtec.2012.01.025

Engström, Andreas, Mouzon, J., Córdoba Gallego, José Manuel, Tegman, R., Antti, Marta Elenna:
Synthesis of a TiCN-SiC polyhedron and elongated crystals nanopowder at low nitrogen concentration. En: Materials Letters. 2012. Vol. 81. Pag. 148-150. 10.1016/fj.matlet.2012.04.071

Chicardi Augusto, Ernesto, Córdoba Gallego, José Manuel, Sayagués de Vega, Maria Jesús, Gotor Martínez, Francisco José:
Inverse core-rim microstructure in (Ti,Ta)(C,N)-based cermets developed by a mechanically induced self-sustaining reaction. En: International Journal of Refractory Metals and Hard Materials. 2012. Vol. 31. Pag. 39-46. http://dx.doi.org/10.1016/j.ijrmhm.2011.09.003

Córdoba Gallego, José Manuel, Chicardi Augusto, Ernesto, Gotor Martínez, Francisco José:
Development of multicomponent-multiphase materials based on (Ti, Ta, Nb)CxN1-x carbonitride solid solutions. En: Chemical Engineering Journal. 2012. Vol. 192. Pag. 58-66. http://dx.doi.org/10.1016/j.cej.2012.03.046

Aviles Escaño, Miguel Angel, Chicardi Augusto, Ernesto, Córdoba Gallego, José Manuel, Sayagués de Vega, Maria Jesús, Gotor Martínez, Francisco José:
In situ synthesis of ceramic composite materials in the Ti-B-C-N system by a mechanically induced self-sustaining reaction. En: Journal of the American Ceramic Society. 2012. Vol. 95. Núm. 7. Pag. 2133-2139. http://dx.doi.org/10.1111/j.1551-2916.2012.05174.x

Chicardi Augusto, Ernesto, Córdoba Gallego, José Manuel, Sayagués de Vega, Maria Jesús, Gotor Martínez, Francisco José:
Absence of the core-rim microstructure in TixTa1-xCyN1-y-based cermets developed from a pre-sintered carbonitride master alloy. En: International Journal of Refractory Metals and Hard Materials. 2012. Vol. 22. Pag. 38-43. http://dx.doi.org/10.1016/j.ijrmhm.2012.02.005

Sayagués de Vega, Maria Jesús, Córdoba Gallego, José Manuel, Gotor Martínez, Francisco José:
Room temperature mechanosynthesis of the La1-xSrxMnO3-d (0En: Journal of Solid State Chemistry. 2012. Vol. 188. Pag. 11-16. 10.1016/j.jssc.2012.01.018

Ali Ballem, Mohamed, Zhang, Xuanjun, M Johansson, Emma, Córdoba Gallego, José Manuel, Odén, Magnus:
Low temperature nanocasting of hematite nanoparticles using mesoporous silica molds. En: Powder Technology. 2012. Vol. 217. Núm. 219. Pag. 269-273. 10.1016/j.powtec.2011.10.037

Morales Rodríguez, Ana, Gallardo Lopez, A., Córdoba Gallego, José Manuel, Aviles Escaño, Miguel Angel, Dominguez Rodriguez, Arturo:
Creep behaviour of TiCxN1-x-CoTi cermets synthesized by mechanically. En: Journal of the European Ceramic Society. 2011. Vol. 31. Pag. 299-302

Gustafsson, Hakan, Ahrén, María, Söderling, Fredrik, Córdoba Gallego, José Manuel, Käll, Per Olov, et. al.:
Magnetic and electron spin relaxation properties of (GdxY 1-x)2O3 (0 ¿ x ¿ 1) nanoparticles synthesized by the combustion method. Increased electron spin relaxation times with increasing yttrium content. En: The Journal of Physical Chemistry C. 2011. Vol. 115. Núm. 13. Pag. 5469-5477. 10.1021/jp111368t

B Spencer, Charles, Córdoba Gallego, José Manuel, Obando, N, Sakulich, a, Radovic, M, et. al.:
Phase evaluation in Al2O3 fiber-reinforced Ti2AlC during sintering in the 1300°C-1500°C temperature range. En: Journal of the American Ceramic Society. 2011. Vol. 94. Núm. 10. Pag. 3327-3334. 10.1111/j.1551-2916.2011.04612.x

Córdoba Gallego, José Manuel, Ali Ballem, Mohamed, M Johansson, Emma, Odén, Magnus:
Growth of single crystalline dendritic Li2SiO3 arrays from LiNO3 and mesoporous SiO2. En: Journal of Solid State Chemistry. 2011. Vol. 184. Núm. 7. Pag. 1735-1739. 10.1016/j.jssc.2011.05.003

Ali Ballem, Mohamed, Córdoba Gallego, José Manuel, Odén, Magnus:
Mesoporous silica templated zirconia nanoparticles. En: Journal of Nanoparticle Research. 2011. Vol. 13. Núm. 7. Pag. 2743-2748. 10.1007/s11051-010-0160-7

B Spencer, Charles, Córdoba Gallego, José Manuel, P Obando, Nicholas, Radovic, Miladin, Odén, Magnus, et. al.:
The reactivity of Ti2AlC and Ti3SiC2 with SiC fibers and powders up to temperatures of 1550°C. En: Journal of the American Ceramic Society. 2011. Vol. 94. Núm. 6. Pag. 1737-1743. 10.1111/j.1551-2916.2010.04332.x

M. Johansson, Emma, Ali Ballem, Mohamed, Córdoba Gallego, José Manuel, Odén, Magnus:
Rapid synthesis of SBA-15 rods with variable lengths, widths, and tunable large pores. En: Langmuir. 2011. Vol. 27. Núm. 8. Pag. 4994-4999. 10.1021/la104864d

Ali Ballem, Mohamed, M Johansson, Emma, Córdoba Gallego, José Manuel, Odén, Magnus:
Synthesis of hollow silica spheres SBA-16 with large-pore diameter. En: Materials Letters. 2011. Vol. 65. Núm. 7. Pag. 1066-1068. 10.1016/j.matlet.2011.01.035

Tsai Tsao, Hao, Córdoba Gallego, José Manuel, Johansson, Emma, Ali Ballem, Mohamed, Odén, Magnus:
Silica SBA-15 template assisted synthesis of ultrasmall and homogeneously sized copper nanoparticles. En: Journal of Nanoscience and Nanotechnology. 2011. Vol. 11. Núm. 4. Pag. 3493-3498. 10.1166/jnn.2011.3609

Córdoba Gallego, José Manuel, Chicardi Augusto, Ernesto, Aviles Escaño, Miguel Angel, Gotor Martínez, Francisco José:
Formation of the Complete Range of Ti5si3-Xgex Solid Solutions Via Mechanically Induced Self-Sustained Reactions. En: Intermetallics. 2011. Vol. 19. Pag. 1688-1692

Aviles Escaño, Miguel Angel, Córdoba Gallego, José Manuel, Sayagués de Vega, Maria Jesús, Gotor Martínez, Francisco José:
Mechanochemical Synthesis of Ti1-Xzrxb2 and Ti1-Xhfxb2 Solid Solutions. En: Ceramics International. 2011. Vol. 37. Pag. 1895-1904

Gallardo López, A., Domínguez Rodríguez, Arturo, Córdoba Gallego, José Manuel, Aviles Escaño, Miguel Angel, Gotor Martínez, Francisco José:
Creep Behavior of Ticxn1-X-Coti Cermets Synthesized by Mechanically Induced Self-Sustaining Reaction. En: Journal of the European Ceramic Society. 2011. Vol. 31. Núm. 3. Pag. 299-302

Frodelius, Jennifer, Johansson, Emma M., Córdoba Gallego, José Manuel, Odén, Magnus, Eklund, Per, et. al.:
Annealing of Thermally Sprayed Ti2alc Coatings. En: International Journal of Applied Ceramic Technology: ceramic product development and commercialization. 2011. Pag. 74-84

Aviles Escaño, Miguel Angel, Avilés, Miguel Ángel, Córdoba Gallego, José Manuel, Sayagués de Vega, Maria Jesús, Alcalá, M.D., et. al.:
Mechanosynthesis of Hf1-Xzrxb2 Solid Solution and Hf1-Xzrxb2/Sic Composite Powders. En: Journal of the American Ceramic Society. 2010. Vol. 93. Núm. 3. Pag. 696-702

Borrell, Amparo, Fernández, Adolfo, Torrecillas, Ramón, Córdoba Gallego, José Manuel, Aviles Escaño, Miguel Angel, et. al.:
Spark Plasma Sintering of Ultrafine Ticxn1-X Powders Synthesized by a Mechanically Induced Self-Sustaining Reaction. En: Journal of the American Ceramic Society. 2010. Vol. 93. Núm. 8. Pag. 2252-2256

Borrell, Amparo, Fernández, Adolfo, Torrecillas, Ramón, Córdoba Gallego, José Manuel, Aviles Escaño, Miguel Angel, et. al.:
Sinterización Por Sps de Polvos Ultrafinos de Ticxn1-X Obtenidos Mediante Reacciones de Autopropagación Inducidas Mecánicamente. En: Boletín de la Sociedad Española de Cerámica y Vidrio. 2010. Vol. 49. Núm. 5. Pag. 357-360

Sayagués de Vega, Maria Jesús, Aviles Escaño, Miguel Angel, Córdoba Gallego, José Manuel, Alcalá González, María Dolores, Gotor Martínez, Francisco José:
Microstructural Characterization of Ceramic-Intermetallic Composites Using TEM Related Techniques. En: Journal of the European Ceramic Society. 2010. Vol. 30. Núm. 8. Pag. 1765-1774

Ullbrand, Jennifer, Córdoba Gallego, José Manuel, Tamayo Aritzondo, Javier, Elizalde Reyes,María, Nygren, Mats, et. al.:
Thermomechanical Properties of Copper-Carbon Nanofibre Composites Prepared by Spark Plasma Sintering and Hot Pressing. En: Composites Science and Technology. 2010. Pag. 2263-2268

Johansson, Emma, Córdoba Gallego, José Manuel, Odén, Magnus:
The Effects on Pore Size and Particle Morphology of Heptane Additions to the Synthesis of Mesoporous Silica Sba-15. En: Microporous and Mesoporous Materials. 2010. Vol. 133. Núm. 1-3. Pag. 66-74

Ballen, Mohamed A., Córdoba Gallego, José Manuel, Odén, Magnus:
Influence of Synthesis Temperature on Morphology of Sba-16 Mesoporous Materials With a Three-Dimensional Pore System. En: Microporous and Mesoporous Materials. 2010. Vol. 129. Pag. 106-111

Gallardo Lopez, A., Morales Rodríguez, Ana, Dominguez Rodriguez, Arturo, Córdoba Gallego, José Manuel, Aviles Escaño, Miguel Angel, et. al.:
High Temperature Mechanical Properties of Ti(C,N)-CO-Mo2c Cermets. En: Key Engineering Materials. 2010. Vol. 423. Pag. 83-88

Tamayo Ariztondo, Javier, Córdoba Gallego, José Manuel, Odén, Magnus, Aldareguia Molina,Jon, Elizalde, María Reyes:
Effect of Heat Treatment of Carbon Nanofibres on Electroless Copper Deposition. En: Composites Science and Technology. 2010. Pag. 2269-2275

Córdoba Gallego, José Manuel, Sanchez Lopez, Juan Carlos, Aviles Escaño, Miguel Angel, Alcalá González, María Dolores, Gotor Martínez, Francisco José:
Properties of Ti(C,N) Cermets Synthesized by Mechanically Induced Self-Sustaining Reaction. En: Journal of the European Ceramic Society. 2009. Vol. 29. Núm. 6. Pag. 1173-1182

Johansson, Emma M., Córdoba Gallego, José Manuel, Odén, Magnus:
Synthesis and Characterization of Large Mesoporous Silica Sba-15 Sheets With Ordered Accessible 18 Nm Pores. En: Materials Letters. 2009. Vol. 63. Pag. 2129-2131

Córdoba Gallego, José Manuel, Tamayo Ariztondo, Javier, Molina Aldareguia, J.M., Elizalde, María Reyes, Odén, Magnus:
Morphology Influence of the Oxidation Kinetics of Carbon Nanofibers. En: Corrosion Science. 2009. Núm. 51. Pag. 926-930

Shahram, Amini, Córdoba Gallego, José Manuel, Daemen, Luke, Mcghie, Andrew R., Ni, Chaoying, et. al.:
On the Stability of Mg Nanograins to Coarsening After Repeated Melting. En: Nano Letters. 2009. Vol. 9. Núm. 8. Pag. 3082-3086

Córdoba Gallego, José Manuel, Aviles Escaño, Miguel Angel, Sayagués de Vega, Maria Jesús, Alcalá González, María Dolores, Gotor Martínez, Francisco José:
Synthesis of Complex Carbonitride Powders Tiymt1-Ycxn1-X (MT: Zr, V, Ta, HF) Via a Mechanically Induced Self-Sustaining Reaction. En: Journal of Alloys and Compounds. 2009. Vol. 482. Pag. 349-355

Córdoba Gallego, José Manuel, Odén, Magnus:
Growth and Characterization of Electroless Deposited CU Films on Carbon Nanofibers. En: Surface and Coatings Technology. 2009. Pag. 3459-3464

Córdoba Gallego, José Manuel, Alcalá González, María Dolores, Aviles Escaño, Miguel Angel, Sayagués de Vega, Maria Jesús, Gotor Martínez, Francisco José:
New Production of Ticxn1-X-Based Cermets by One Step Mechanically Induced Self-Sustaining Reaction: Powder Synthesis and Pressureless Sintering. En: Journal of the European Ceramic Society. 2008. Vol. 28. Núm. 10. Pag. 2085-2098

Córdoba Gallego, José Manuel, Alcalá González, María Dolores, Sayagués de Vega, Maria Jesús, Aviles Escaño, Miguel Angel, Real Pérez, Concepción, et. al.:
Nitriding Study of Titanium Silicide Intermetallics Obtained by Mechanical Alloying. En: Intermetallics. 2008. Vol. 16. Núm. 8. Pag. 948-954

Córdoba Gallego, José Manuel, Sayagués de Vega, Maria Jesús, Alcalá González, María Dolores, Gotor Martínez, Francisco José:
Monophasic Nanostructured Powders of Niobium, Tantalum, and Hafnium Carbonitrides Synthesized by a Mechanically Induced Self-Propagating Reaction. En: Journal of the American Ceramic Society. 2007. Vol. 90. Núm. 2. Pag. 381-387

Córdoba Gallego, José Manuel, Sayagués de Vega, Maria Jesús, Alcalá González, María Dolores, Gotor Martínez, Francisco José:
Synthesis of Ti3sic2 Powders: Reaction Mechanism. En: Journal of the American Ceramic Society. 2007. Vol. 90. Núm. 3. Pag. 825-830

Córdoba Gallego, José Manuel, Sayagués de Vega, Maria Jesús, Alcalá González, María Dolores, Gotor Martínez, Francisco José:
Monophasic Tiynb1-Ycxn1-X Nanopowders Obtained At Room Temperature by Msr. En: Journal of Materials Chemistry. 2007. Vol. 17. Núm. 7. Pag. 650-653

Córdoba Gallego, José Manuel, Sayagués de Vega, Maria Jesús, Alcalá González, María Dolores, Gotor Martínez, Francisco José:
Synthesis of Titanium Carbonitride Phases by Reactive Milling of the Elemental Mixed Powders. En: Journal of the American Ceramic Society. 2005. Vol. 88. Núm. 7. Pag. 1760-1764

Córdoba Gallego, José Manuel, Murillo Luengo,Raquel, Alcalá González, María Dolores, Sayagués de Vega, Maria Jesús, Gotor Martínez, Francisco José:
Synthesis of Tin/Si3n4 Composite Powders by Mechanically Activated Annealing. En: Journal of Materials Research. 2005. Vol. 20. Núm. 4. Pag. 864-873

Aportaciones a Congresos

Córdoba Gallego, José Manuel, Centeno Gallego, Miguel Angel, Odriozola Gordon, José Antonio:
La estructura cristalina de la espinela MgAl2O4 como condicionante de la actividad de catalizadores MN/MgAl2O4 (MN:Rh y Pt) en reformado de biogás. Poster en Congreso. Reunión Bienal de la Sociedad Española de Catálisis. - Córdoba. 2019

Azancot, Lola, Bobadilla Baladrón, Luis Francisco, Córdoba Gallego, José Manuel, Centeno Gallego, Miguel Angel, Odriozola Gordon, José Antonio:
Influencia del método de preparación en la interacción Ni-Mg-Al: efecto en la reacción de reformado de metano con vapor de agua. Poster en Congreso. XXVI Congreso Iberoamericano de Catálisis. - Coimbra, Portugal. 2018

Azancot, Lola, Bobadilla Baladrón, Luis Francisco, Córdoba Gallego, José Manuel, Centeno Gallego, Miguel Angel, Odriozola Gordon, José Antonio:
Effect of metal-support interaction in the catalytic performance of Ni-based catalysts. Ponencia en Congreso. III encuentro de jóvenes investigadores de la SECAT. Valencia, ESPAÑA. 2018

Gómez Millán, Lorenzo L, Gotor Martínez, Francisco José, Alcalá González, María Dolores, Real Pérez, Concepción, Aviles Escaño, Miguel Angel, et. al.:
Effect of carbon content on the microstructure and mechanical properties of mechanochemically synthesized WC-HEA bard metals. Poster en Congreso. XV Congreso Nacional de Materiales and I Iberian Meeting on Materials Science 2018. Salamanca, España. 2018

Córdoba Gallego, José Manuel:
Isosymmetric structural phase transition of the orthorhombic lanthanum gallate structure as a function of temperature determined by Rietlved analysis. Conferencias impartidas en Otras Actividades Divulgativas. Conferencias ICMS-Sci-Talk. Sevilla. 2017

Alcalá González, María Dolores, Real Pérez, Concepción, Fombella, Irene, Trigo, Inmaculada, Córdoba Gallego, José Manuel:
Chemical nature changes on sintered ball milled synthesized FeCoNiCrMn(Al) HEA phases. Poster en Congreso. 24 th ISMANAM. San Sebastian, España. 2017

Velo, Irene, Gotor Martínez, Francisco José, Alcalá González, María Dolores, Real Pérez, Concepción, Córdoba Gallego, José Manuel:
First attempt for a new class of hard metals. WC-FeCoNiCrMn composites. Poster en Congreso. 24 th ISMANAM. San Sebastian, España. 2017

Velo, Irene, Alcalá González, María Dolores, Córdoba Gallego, José Manuel:
First attempt for a new class of hard metals. WC-FeCoNiCrMn composites. Poster en Congreso. 24 th ISMANAM. San Sebastian, España. 2017

Velo, Irene, Real Pérez, Concepción, Alcalá González, María Dolores, Aviles Escaño, Miguel Angel, Córdoba Gallego, José Manuel:
Future and Prospect for Nanostructured High Entropy Alloys. Aerospace and Biomedical Applications. Poster en Congreso. 24th ISMANAM. San Sebastian, España. 2017

Chicardi Augusto, Ernesto, Gotor Martínez, Francisco José, Alcalá González, María Dolores, Sayagués de Vega, Maria Jesús, Aviles Escaño, Miguel Angel, et. al.:
Influencia de los parámetros de molienda en la síntesis sólido-gas de TiCxN1-x por una reacción auto-sostenida inducida mecánicamente. Poster en Congreso. LV Congreso Nacional de la Sociedad Española de Cerámica y Vidrio. Sevilla. 2016

García de la Obra, Alma, Aviles Escaño, Miguel Angel, Chicardi Augusto, Ernesto, Real Pérez, Concepción, Alcalá González, María Dolores, et. al.:
Síntesis Por Aleado Mecánico de Aleaciones de Alta Entropía de Mezcla de Interés Como Fase Cementante en Cermets Basados en Carbonitruro de Titanio. Comunicación en congreso. XIV Congreso Nacional de Materiales. Gijón, España. 2016

Gotor Martínez, Francisco José, Chicardi Augusto, Ernesto, Bermejo Moratino, Raúl, Llanes Pitarch, Luis Miguel, Córdoba Gallego, José Manuel, et. al.:
Influencia de la temperatura en la resistencia mecánica de cermets basados en carbonitruro de titanio. Comunicación en congreso. V Congreso Nacional de Pulvimetalurgia. Gerona, España. 2015

Gotor Martínez, Francisco José, Aviles Escaño, Miguel Angel, García de la Obra, Alma, Sayagués de Vega, Maria Jesús, Torres Hernández, Yadir, et. al.:
A new family of cermets: chemically complex but simple microstructurally. Comunicación en congreso. Advances in Materials & Processing Technologies. Leganés (Madrid), España. 2015

González, Luis Manuel, Gotor Martínez, Francisco José, Bermejo Moratino, Raúl, Chicardi Augusto, Ernesto, Córdoba Gallego, José Manuel, et. al.:
Diseño y fabricación de laminados tipo Ti(C,N)¿Co/WC¿Co con un potencial equilibrio de propiedades en servicio. Comunicación en congreso. 32º Congreso Español de Fractura e Integridad Estructural. Zamora. 2015

Chicardi Augusto, Ernesto, Torres Hernández, Yadir, Sayagués de Vega, Maria Jesús, Medri, Valentina, Melandri, C., et. al.:
Aumento de la tenacidad de fractura en cermets basados en carbonitruro de titanio mediante la adición de grafito. Comunicación en congreso. 32º Congreso Español de Fractura e Integridad Estructural. Zamora. 2015

Chicardi Augusto, Ernesto, Córdoba Gallego, José Manuel, Torres Hernández, Yadir, Sayagués de Vega, Maria Jesús, Gotor Martínez, Francisco José:
Effects of carbon addition on the mechanical properties of (TixTa1-x)(CyN1-y)-Co cermets. Poster en Congreso. European Congress And Exhibition On Advanced Materials And Process. Sevilla-Spain. 2013

Córdoba Gallego, José Manuel, Chicardi Augusto, Ernesto, Sayagués de Vega, Maria Jesús, Torres Hernández, Yadir, Gotor Martínez, Francisco José:
Multilayered hard metal composites conformed by conventional powder metallurgical methods. Poster en Congreso. EUROMAT 2013 Conference. Seville, Spain. 2013

Gotor Martínez, Francisco José, Córdoba Gallego, José Manuel, Chicardi Augusto, Ernesto, Guicciardi, Stefano, Medri, Valentina, et. al.:
Design, processing and mechanical behaviour of Cermet/WC-Co laminates. Poster en Congreso. 18th Plansee Seminar - International Conference on Refractory Metals and Hard Materials. Reutte, Tyrol (Austria). 2013

Córdoba Gallego, José Manuel, Chicardi Augusto, Ernesto, Lences, Zoltan, Gotor Martínez, Francisco José:
Hot press sintering of hard material master master alloys synthesized in situ by mechanically induced self-sustaining reaction. Comunicación en congreso. 18th Plansee Seminar - International Conference on Refractory Metals and Hard Materials. Reutte, Tyrol (Austria). 2013

Moriche, Rocío, Sayagués de Vega, Maria Jesús, Córdoba Gallego, José Manuel, García García, Francisco José:
Microstructure, chemical stability and conductivity of LSM based cathodes obtained by mechanochemical method at room temperature. Ponencia en Congreso. 1st Al-NanoFunc Workshop Advanced Microstructural Characterization of Nanomaterials. 2012

Córdoba Gallego, José Manuel, Chicardi Augusto, Ernesto, Torres Hernández, Yadir, Rodriguez Ortiz, Jose Antonio, Sayagués de Vega, Maria Jesús, et. al.:
Effect of tantalum on the microstructure and mechanical properties of /Ti,Ta)(C,N) based cermets developed by MSR. Poster en Congreso. IV Congreso Nacional de Pulvimetalurgia. ETS de Ingenieros, Sevilla. 2012

Córdoba Gallego, José Manuel, Chicardi Augusto, Ernesto, Aviles Escaño, Miguel Angel, Sayagués de Vega, Maria Jesús, Gotor Martínez, Francisco José:
Integration of Cermet Component Materials into a Solid Solution Master Alloy by Mecahnically Self-Sustaining Reaction. Comunicación en congreso. Euro Powder Metallurgy 2012 Congress & Exhibition. Basilea (Suiza). 2012

Moriche Tirado, Rocío, Sayagués de Vega, Maria Jesús, Córdoba Gallego, José Manuel, Gotor Martínez, Francisco José:
Microstructural analysis of La1-xSrxMnO3 (LSM) based cathodes obtained by mechanochemical method at room temperature. Poster en Congreso. The 15th European Microscopy Congress. Manchester, UK. 2012

Sayagués de Vega, Maria Jesús, Chicardi Augusto, Ernesto, Córdoba Gallego, José Manuel, Gotor Martínez, Francisco José:
Evolution of the microstructure of Ti0.8Ta0.2C0.5N0.5-Co composite material developed by a one or two-steps MSR process. Poster en Congreso. The 15th European Microscopy Congress. Manchester, UK. 2012

Sayagués de Vega, María Jesús, Córdoba Gallego, José Manuel, Gotor Martínez, Francisco José:
Room temperature mechanosynthesis of the La1-xSrxMnO3±¿ (0¿x¿1) system and microstructural study. Poster en Congreso. VII International Conference on Mechanochemistry and Mechanical Alloying INCOME 2011. 2011

M Johansson, Emma, Ali Ballem, Mohamed, Córdoba Gallego, José Manuel, Odén, Magnus:
Rapid syntheses of mesoporous silica with controllable morphology and unusually large pores. Ponencia en Congreso. ECerS XII 12th Conference of the European Ceramic Society. 2011

Córdoba Gallego, José Manuel, Ali Ballem, Mohamed, M Johansson, Emma, Odén, Magnus:
Growth of single crystalline dendritic Li2SiO3 arrays from LiNO3 and mesoporous SiO2. Ponencia en Congreso. ECerS XII 12th Conference of the European Ceramic Society. 2011

Córdoba Gallego, José Manuel, Chicardi Augusto, Ernesto, Gotor Martínez, Francisco José, Sayagués de Vega, Maria Jesús:
Effect of the binder content, additives and sintering time on the solubility of Ti-(C,N) based cermets. Poster en Congreso. IV Portuguese-Spanish Congress on Ceramics and Glasses. Aveiro, Portugal. 2011

Chicardi Augusto, Ernesto, Torres Hernández, Yadir, Córdoba Gallego, José Manuel, Rodriguez Ortiz, Jose Antonio, Sayagués de Vega, Maria Jesús, et. al.:
Effect of sintering time on the microstructure and mechanical properties of (Ti,Ta)(C,N) based cermets. Poster en Congreso. IV Portuguese-Spanish Congress on Ceramics and Glasses. Aveiro, Portugal. 2011

Córdoba Gallego, José Manuel, Chicardi Augusto, Ernesto, Sayagués de Vega, Maria Jesús, Poyato Galán, Rosalía, Gotor Martínez, Francisco José:
Consolidation of TiyTa1-yC0.5N0.5 based Cermets by Spark Plasma Sintering. Poster en Congreso. IV Portuguese-Spanish Congress on Ceramics and Glasses. Aveiro, Portugal. 2011

Gotor Martínez, Francisco José, Sayagués de Vega, Maria Jesús, Aviles Escaño, Miguel Angel, Córdoba Gallego, José Manuel, Chicardi Augusto, Ernesto, et. al.:
Síntesis de materiales compuestos del sistema Ti-B-C-N de interés para aplicaciones en ambientes extremos. Poster en Congreso. IV Portuguese-Spanish Congress on Ceramics and Glasses. Aveiro, Portugal. 2011

Córdoba Gallego, José Manuel, Chicardi Augusto, Ernesto, Sayagués de Vega, Maria Jesús, Gotor Martínez, Francisco José:
Development of multicomponent-multiphase materials based on (Ti, Ta, Nb)CxN1-x Carbonitride Solid Solutions. Comunicación en congreso. IV Portuguese-Spanish Congress on Ceramics and Glasses. Aveiro, Portugal. 2011

Sayagués de Vega, Maria Jesús, Córdoba Gallego, José Manuel, Gotor Martínez, Francisco José:
Microstructural analysis of components for SOFCs based on La1-xSrxMnO3±y (0
Chicardi Augusto, Ernesto, Córdoba Gallego, José Manuel, Aviles Escaño, Miguel Angel, Sayagués de Vega, Maria Jesús, Gotor Martínez, Francisco José:
Development of TixTa1-xCyN1-y-based cermets via a mechanically-induced self-sustaining reaction. Poster en Congreso. VII International Conference on Mechanochemistry and Mechanical Alloying (Income 2011). Montenegro, Serbia. 2011

Sayagués de Vega, Maria Jesús, Córdoba Gallego, José Manuel, Gotor Martínez, Francisco José:
Development of cathodes (La1-xSrxMnO3) for solid oxide fuel cells by mechanosynthesis. Poster en Congreso. VII International Conference on Mechanochemistry and Mechanical Alloying (Income 2011). Montenegro, Serbia. 2011

Barsoum, Michel, Córdoba Gallego, José Manuel, Amini, Shahram, Odén, Magnus, Ultman, Lars:
Thermal Stability and Effect of Texture on Ultrahigh Damping of Nanocrystalline Mg-Matrix Composites Reinforced with MAX. Ponencia en Congreso. The 7th Pacific Rim International Conference on Advanced Materials and Processing (PRICM 7)". 2010

M Johansson, Emma, Córdoba Gallego, José Manuel, Odén, Magnus:
Pore size and morphology control in the synthesis of SBA-15 by heptane additions. Ponencia en Congreso. 7th International Mesoporous Materials Symposium. 2010

Ali Ballem, Mohamed, Córdoba Gallego, José Manuel, Odén, Magnus:
Influence of synthesis temperature on morphology of SBA-16 mesoporous materials. Poster en Congreso. 7th International Mesoporous Materials Symposium. 2010

Córdoba Gallego, José Manuel, T Tsai, H, M Johansson, Emma, Ali Ballem, Mohamed, Odén, Magnus:
Silica SBA-15 template assisted synthesis of ultrasmall and homogeneously sized copper nanoparticles. Poster en Congreso. 7th International Mesoporous Materials Symposium. 2010

M Johansson, Emma, Córdoba Gallego, José Manuel, Odén, Magnus:
Pore size and morphology control of SBA-15 by Heptane Additions and its Potential Applications. Poster en Congreso. JSPS Sweden-Japan Joint Symposium. 2010

Frodelius, Jenny, M. Johansson, Emma, Córdoba Gallego, José Manuel, Odén, Magnus, Ultman, Lars:
Heat treated Ti2AlC Coatings Sprayed with High Velocity Oxy-Fuel. Poster en Congreso. 34th International Conference and Exposition on Advanced Ceramics and Composites (ICACC). 2010

Tamayo Aritzondo, Javier, Córdoba Gallego, José Manuel, Odén, Magnus, Molina Aldareguía, J.m., Reyes Elizalde, María:
Effect of Heat Treatment of Carbon Nanofibres on Copper Deposition by Electroless. Poster en Congreso. Euromat 2009. 2009

Córdoba Gallego, José Manuel, Tamayo Aritzondo, Javier, Molina Aldareguia, J.m., Reyes Elizalde, María, Odén, Magnus:
Morphology Influence of the Oxidation Kinetics of Carbon Nanofibres. Poster en Congreso. Euromat 2009. 2009

Córdoba Gallego, José Manuel, Ullbrand, Jennifer, Tamayo Aritzondo, Javier, Reyes Elizalde, María, Odén, Magnus:
Sintering of electroless Cu deposited Carbon nanofibers by spark plasma sintering and uniaxial hot pressing. Poster en Congreso. Euromat 2009. 2009

M Johansson, Emma, Córdoba Gallego, José Manuel, Odén, Magnus:
Synthesis of mesoporous silica SBA-15 with varying morphologies and large pores. Ponencia en Congreso. Euromat 2009. 2009

Córdoba Gallego, José Manuel:
Free standing AlN single crystal growth on pre-patterned and in situ patterned 4H-SiC substrates. Ponencia en Congreso. 8th International Conference in Nitride Semiconductors. 2009

Sayagués de Vega, Maria Jesús, Aviles Escaño, Miguel Angel, Córdoba Gallego, José Manuel, Alcalá González, María Dolores, Gotor Martínez, Francisco José:
Microstructural Characterization of Ticxny-NI Cermet Using Microscopic Related Techniques. Poster en Congreso. Joint Congress of the Spanish and Portuguese Microscopy Societies. Segovia, España. 2009. Abstracts of the Joint Meeting of the Spanish and Portuguese Microscopy Societies. 283. 284

Gotor Martínez, Francisco José, Córdoba Gallego, José Manuel, Aviles Escaño, Miguel Angel, Sayagués de Vega, Maria Jesús, Alcalá González, María Dolores:
Development of Transition Metal Nitrides, Carbides, and Borides-Based Materials by Mechanically Induced Self-Sustaining Reactions. Comunicación en congreso. 29th International Exhibition-Congress on Chemical Engineering, Environmental Protection and Biotechnology. Frankfurt AM Main. 2009. 29th International Exhibition-Congress on Chemical Engineering, Environmental Protection and Biotechnology. W13. W13

Córdoba Gallego, José Manuel:
Microcharacterization of CERMETS (TiCxN1-x -M, M=Ni, Co) Using HRSEM, ED/HRTEM, EELS and EFTEM Techniques. Poster en Congreso. Sixth Internacional Conference on Inorganic Materials. 2008

Aviles, M a, Córdoba Gallego, José Manuel, Sayagués de Vega, Maria Jesús, Alcalá González, María Dolores, Gotor Martínez, Francisco José:
Synthesis of Bimetallic Diborides of Transition Metals by Mechanically Induced Self-Sustaining Reactions. Poster en Congreso. 43rd Croatian and 3rd International Symposium on Agriculture. Opatija, Croacia. 2008. Abstracts of XII International Conference on Applied Stochastic Models and Data Analysis. 33. 33

Gallardo Lopez, A., Morales Rodríguez, Ana, Dominguez Rodriguez, Arturo, Córdoba Gallego, José Manuel, Aviles, M a, et. al.:
Comportamiento Plástico en Compresión Uiniaxial de Cermets Ti(C,N)-CO. Comunicación en congreso. XI Congreso Nacional de Propiedades Mecánicas de los Sólidos. El Bosque (Cádiz), España. 2008. Actas del XI Congreso Nacional de Propiedades Mecanicas de Solidos. 67. 68

Borrell, Amparo, Fernández, Adolfo, Torrecillas, Ramón, Córdoba Gallego, José Manuel, Aviles Escaño, Miguel Angel, et. al.:
Sinterización Por Sps de Polvos Ultrafinos de Ti(C,N) Obtenidos Mediante Reacciones de Autopropagación Inducidas Mecánicamente. Poster en Congreso. Congreso Anual de la Sociedad Española de Cerámica y Vidrio. Oviedo. 2008. Xlviii Congreso Anual de la Sociedad Española de Cerámica y Vidrio. 85. 85

Sayagués de Vega, Maria Jesús, Córdoba Gallego, José Manuel, Alcalá González, María Dolores, Gotor Martínez, Francisco José:
Estudio Microestructural de Cermets:Ticxn1-X-NI. Poster en Congreso. Reunión Bienal de la Sociedad de Microscopía de España. Bilbao. 2007. Resumenes de la XXIII Reunion Bienal de la Sociedad de Microscopía de España. 107. 108

Córdoba Gallego, José Manuel, Aviles Escaño, Miguel Angel, Alcalá González, María Dolores, Sayagués de Vega, Maria Jesús, Gotor Martínez, Francisco José:
Synthesis of Master Alloys Based on Complex Carbonitride Phases by Mechanically Induced Self-Sustaining Reactions. Comunicación en congreso. Euromat 2007. Nürrnberg, Alemania. 2007. Euromat 2007. B12-233. B12-233

Córdoba Gallego, José Manuel, Gotor Martínez, Francisco José, Sayagués de Vega, Maria Jesús, Alcalá González, María Dolores:
Synthesis of Metal Transition Carbonitride Phases by Mechanically-Induced Self-Propagating Reactions. Poster en Congreso. International Congress on Ceramics. Toronto (Canadá). 2006. Proceedings of the 1st International congress on sustainable construction and eco-efficient solutions. 27. 27

Sayagués de Vega, Maria Jesús, Córdoba Gallego, José Manuel, Alcalá González, María Dolores, Gotor Martínez, Francisco José:
Structural Study of Ti and Nb Carbonitrides. Comunicación en congreso. 16th International Microscopy Congress. Sapporo, Japan. 2006. Proceedings of 16th International Microscopy Congress. 1712. 1712

Sayagués de Vega, Maria Jesús, Córdoba Gallego, José Manuel, Alcalá González, María Dolores, Gotor Martínez, Francisco José:
Synthesis of Ti3sic2 Powders: Structural Characterization and Reaction Mechanism. Poster en Congreso. 16th International Microscopy Congress. Sapporo, Japan. 2006. Proceedings of 16th International Microscopy Congress. 1741. 1741

Gallardo Lopez, A., Dominguez Rodriguez, Arturo, Córdoba Gallego, José Manuel, Aviles, M a, Gotor Martínez, Francisco José:
Estudio del Límite Elástico en Cermets Ti(C,N)-NI. Comunicación en congreso. Congreso Nacional de Propiedades Mecánicas de Sólidos. Santiago de Compostela. 2006. X Congreso Nacional de Propiedades Mecánicas de Sólidos. 90. 91

Córdoba Gallego, José Manuel, Sayagués de Vega, Maria Jesús, Alcalá González, María Dolores, Gotor Martínez, Francisco José:
Síntesis Térmica de Cerámicas Basadas en el Compuesto Ti3sic2. Poster en Congreso. Reunión Anual de la Sociedad Española de Cerámica y Vidrio. Santander (ESPAÑA). 2005

Alcalá González, María Dolores, Córdoba Gallego, José Manuel, Sayagués de Vega, Maria Jesús, Real Pérez, Concepción, Gotor Martínez, Francisco José:
Synthesis of Titanium Carbonitride Phases by Reactive Milling of the Elemental Powders. Poster en Congreso. 7th International Conference on Nanostructured Materials. Wiesbaden (Alemania). 2004. 7th International Conference on Nanostructured Materials. 308. 308

Córdoba Gallego, José Manuel, Alcalá González, María Dolores, Gotor Martínez, Francisco José:
Síntesis de Carbonitruros de Titanio (Ticxn1-X) Por Molienda Reactiva. Poster en Congreso. XLIII Congreso de la Sociedad Española de Cerámica y Vidrio. Manises (Valencia(. 2003. XLIII Congreso de la Sociedad Española de Cerámica y Vidrio. 95. 95

Chicardi Augusto, Ernesto, Córdoba Gallego, José Manuel, Gotor Martínez, Francisco José:
Outstanding improvement of the high temperature oxidation resistance of cermets based on (Ti,Ta)(C,N). Comunicación en congreso

Córdoba Gallego, José Manuel, Gotor Martínez, Francisco José, Aviles Escaño, Miguel Angel, García de la Obra, Alma:
Estudio de los procesos de difusión en multicapas de materiales compuestos cerámica-metal y sus efectos en la adherencia entre las capas. Poster en Congreso

Yazdi, G.r., Córdoba Gallego, José Manuel, Vassilevski, K., Nikitina, I.p., Odén, Magnus, et. al.:
Free standing AlN single crystal growth on pre-patterned and in situ patterned 4H-SiC substrates TYPE OF PRESENTATION: Oral. Comunicación en congreso. 8th International Conference in Nitride Semiconductors

Otras Publicaciones

Córdoba Gallego, José Manuel, Paneque Macías, Patricia:
Estudio de Levaduras Vínicas en Mostos Fermentados en el Aljarafe Alto (Sevilla): Aislamiento, Identificación y Selección. Otras Publicaciones

Patentes:

Gotor Martínez, Francisco José, Sayagués de Vega, Maria Jesús, Sanchez Soto, Pedro Jose, Aviles Escaño, Miguel Angel, Córdoba Gallego, José Manuel, et. al.:
Procedimiento para la Obtencion de un Material Compuesto a Base de Diboruro de Titanio con Contenidos Variables de Particulas Nanometricas y/o Submicrometricas de Monoboruro, Nitruro, Carburo Ocarbonitruro de Titanio Mediante Reaccion Autosostenible. Patente de invención, Propiedad industrial. Solicitud: 2011-11-15

Tesis dirigidas y co-dirigidas:

Chicardi Augusto, Ernesto:
Desarrollo de cermets basados en soluciones sólidas mediante procesos mecanoquímicos. Tesis Doctoral. 2014

Ali, Mohamed:
Synthesis of mesoporous silica and their use as templates for metal and metal oxide nanoparticles. Tesis Doctoral. 2011