José Antonio Reinoso Cuevas
Telefono: 95487299
Email: Solicitar correo
Perfil en ORCID: 0000-0001-5469-3736
Perfil en Scopus: 26644306500

Grupo de Investigación: Ingeniería de Estructuras y Materiales
Departamento/Unidad: Mecánica de Medios Continuos y Teoría de Estructuras
Situación profesional: Catedrático de Universidad

Responsable de los siguientes proyectos/ayudas en la US:

• Proyecto de investigación:
  • Ductility and Fracture Toughness analysis of functionally graded materials” - DIAGONAL (GA-01086342)
  • Métodos computacionales multi-escala y multi-física para la predicción de procesos de fractura de sistemas fotovoltaicos (TED2021-131649B-I00)
  • COMPBIOS-e. An innovative paradigm for highly stretchable electronic systems with enhanced damage tolerance and contact-adhesion: multi-scale and multi-physics modelling framework and exploitation of bioinspired designs via 3D printing techniques (P20_00595)
  • Caracterización de Procesos de Fractura en Margas: Experimentación y Modelización Mediante Modelos Variacionales Hidro-Mecánicos en Materiales Porosos Parcialmente Saturados (PID2019-109723GB-I00)
  • Interfases estructuradas en estructuras de materiales compuestos (IntEstComp) (US-1265577)
  
  
• Contrato con empresas (Arts. 68/83 LOU):
  • FLOATWIND - Investigación de nuevas soluciones tecnológicas de diseño y fabricación de superestructuras para eólica marina flotante. Nuevos procesos de tratamiento superficial para estructuras offshore (PI-2513/33/2024)
  • Cálculo Estructural Rack 02 Instalación 02 EC 145 (3434/0955)
  
  

Participa en los siguientes proyectos/ayudas en la US:

• Proyecto de investigación:
  • New strategies for multifield fracture problems across scales in heterogeneous systems for Energy, Health and Transport -NEWFRAC (H2020-861061 - Investigador)
  • Methodology Development and Validation of WEight Optimized Stiffeners Run-Out Design for Future Composite Wings - DOVER (SI-1782/13/2018)
  • Nuevos Enfoques de la Mecánica de la Fractura Computacional para la Caracterización de Inicio y Crecimiento de Grietas en Materiales Compuestos en Diferentes Escalas (MAT2015-71036-P - Equipo de Investigación (Alta/Baja))
  • Desarrollo de un Procedimiento de Dimensionamiento por Unfolding en Materiales Compuestos (MAT2015-71309-P - Equipo Trabajo (Solicitud))
  • Elementos Laminares Avanzados para Análisis no Lineales de Paneles de Material Compuesto (DPI2012-37187 - Investigador)
  • Estudio del Comportamiento de Laminados Gruesos de Material Compuesto Sometidos a Cargas de Compresión. (P12-TEP-1050 - Investigador)
  • Desarrollo de un nuevo diseño de una pantalla ferroviaria triple función: viento, ruido y energía (TRIPANTALLA) (IPT-2011-1099-370000 - Contratado)
  • Análisis del Comportamiento de Paneles Rigidizados de Material Compuesto en Régimen de Postpandeo (P11-TEP-7093 - Investigador)
  • Desarrollo de modelos cohesivos y de mecánica de la fractura para el estudio de uniones cocuradas y copegadas de materiales compuestos (P06-TEP-02045 - Becario)
  
  
• Contrato con empresas (Arts. 68/83 LOU):
  • ECLIPSE: Estructuras en Composites y materiales LIgeros para Procesos de Sencillo Ensamblaje Proyecto Convocatoria INNTERCONECTA (PI-0978/2012 - Investigador)
  
  
• Ayuda a la investigación:
  • Incentivo al Grupo de Investigación TEP-131 (2017/TEP-131 - Investigador)
  • Incentivo al Grupo de Investigación TEP-131 (2011/TEP-131 - Investigador)
  • Incentivo al Grupo de Investigación TEP-131 (2010/TEP-131 - Investigador)
  • Ayuda a la Consolidación del Grupo de Investigación TEP-131 (2009/TEP-131 - Investigador)
  
  

Cobertura de la base de datos de proyectos, véase aqui

Publicaciones:

Libros

Reinoso Cuevas, José Antonio:
Development of a continuum shell element for the structural analysis of stiffened panels in postbuckling regime. EADS Chair of Aeronautical Studies. 2013. 59. ISBN 978-84-616-7037-X

Reinoso Cuevas, José Antonio:
Nonlinear dynamic behaviour of cables. Alemania. Editorial Académica Española. 2011. 110. ISBN ISBN:978-3-8443-3612-2

Reinoso Cuevas, José Antonio:
Postpandeo de paneles rigidizados de composites. Alemania. Editorial Académica Española. 2010. 103. ISBN 978-3-8443-3584-2

Capítulos en Libros

Paggi, Marco, Bemporad, Alberto, Reinoso Cuevas, José Antonio:
Computational methods for contact problems with roughness. Pag. 131-178. En: Modeling and Simulation of Tribological Problems in Technology. Springer, Cham. 2020. ISBN 978-3-030-20376-4

Haldar, Ayan, Reinoso Cuevas, José Antonio, Jansen, Eelco, Rolfes, Raimund:
Snap-through of bistable configurations generated from variable stiffness composites. In: Multiscale Modeling of Heterogeneous Structures. Pag. 61-82. En: Lecture Notes in Applied and Computational Mechanics. Berlin Springer Verlag. 2018. ISBN 978-3-319-65462-1

Dean, Aamir, Reinoso Cuevas, José Antonio, Sahraee, Shahab, Daum, Beneditk, Rolfes, Raimund:
Invariant-based finite strain anisotropic material model for fiber-reinforced composites. Pag. 83-110. En: Lecture Notes in Applied and Computational Mechanics. Spinger Verlag. 2018

Reinoso Cuevas, José Antonio, Blázquez Gámez, Antonio M., Paris Carballo, Federico:
Damage simulations in Composite Structures in the Presence of Stress Gradients. Pag. 391-424. En: Modeling Damage, Fatigue and Failure of Composite Materials. Woodhead Publishing (Elsevier). 2016. ISBN 978-1-78242-286-0

Reinoso Cuevas, José Antonio, Paggi, Marco, Blázquez Gámez, Antonio M.:
A modeling framework for the analysis of instabilities and delamination in composite shells.

Publicaciones en Revistas

Guillén Hernández, Teresa, Quintana Corominas, Adrià, García García, Israel, Reinoso Cuevas, José Antonio, Paggi, Marco, et. al.:
In-situ strength effects in long fibre reinforced composites: A micro-mechanical analysis using the phase field approach of fracture. En: Theoretical and Applied Fracture Mechanics. 2020. Vol. 108. Núm. 102621. https://doi.org/10.1016/j.tafmec.2020.102621

García, Lorenzo, Reinoso Cuevas, José Antonio, Valverde González, Ángel, Martínez Pañeda, Emilio, Távara Mendoza, Luis:
Numerical study of interface cracking in composite structures using a novel geometrically nonlinear Linear Elastic Brittle Interface Model: Mixed-mode fracture conditions and application to structured interfaces. En: Composite Structures. 2020. Vol. 248. Núm. 112495. https://doi.org/10.1016/j.compstruct.2020.112495

García, Lorenzo, Reinoso Cuevas, José Antonio, Távara Mendoza, Luis, Paris Carballo, Federico:
A consistent finite displacement and rotation formulation of the Linear Elastic Brittle Interface Model for triggering interlaminar damage in fiber-reinforced composites. En: Theoretical and Applied Fracture Mechanics. 2020. Vol. 108. Núm. 102644. https://doi.org/10.1016/j.tafmec.2020.102644

Dean, Aamir, Asur Vijaya Kumar, Pavan Kumar, Reinoso Cuevas, José Antonio, Gerendt, Christian, Paggi, Marco, et. al.:
A multi phase-field fracture model for long fiber reinforced composites based on the Puck theory of failure. En: Composite Structures. 2020. Núm. 112446. https://doi.org/10.1016/j.compstruct.2020.112446

Quintanas Corominas, A., Turón, A., Reinoso Cuevas, José Antonio, Casoni, E., Paggi, Marco, et. al.:
A phase field approach enhanced with a cohesive zone model for modeling delamination induced by matrix cracking Open Access. En: Computer Methods in Applied Mechanics and Engineering. 2020. Vol. 358. Núm. 112618. https://doi.org/10.1016/j.cma.2019.112618

Guillén Hernández, Teresa, Reinoso Cuevas, José Antonio, Paggi, Marco:
Phase field model for fracture analysis of functionally graded power-based shell structures. En: Mechanics of Advanced Materials and Structures. 2020. https://doi.org/10.1080/15376494.2020.1751354

Aranda, María Teresa, García García, Israel, Reinoso Cuevas, José Antonio, Mantic Lescisin, Vladislav, Paggi, Marco:
Crack arrest through branching at curved weak interfaces: An experimental and numerical study. En: Theoretical and Applied Fracture Mechanics. 2020. Vol. 105. Núm. 102389. https://doi.org/10.1016/j.tafmec.2019.102389

Dean, Aamir, Reinoso Cuevas, José Antonio, Kha, Niraj, Mahdi, e, Rolfes, R.:
A phase field approach for ductile fracture of short fibre reinforced composites. En: Theoretical and Applied Fracture Mechanics. 2020. Vol. 106. Núm. 102495. https://doi.org/10.1016/j.tafmec.2020.102495

Fantoni, Francesca, Bacigalupo, a, Paggi, Marco, Reinoso Cuevas, José Antonio:
A phase field approach for damage propagation in periodic microstructured materials. En: International Journal of Fracture. 2020. Vol. 223. Núm. 1-2. Pag. 53-76. https://link.springer.com/article/10.1007%2Fs10704-019-00400-x

Mariggiò, Gregorio, Reinoso Cuevas, José Antonio, Corrado, Mauro, Paggi, Marco:
Peeling of thick adhesive interfaces: The role of dynamics and geometrical nonlinearity. En: Mechanics Research Communications. 2019. Vol. 94. Pag. 21-27. https://doi.org/10.1016/j.mechrescom.2018.08.018

Arteiro, Albertino, Catalanotti, Giuseppe, Reinoso Cuevas, José Antonio, Linde, Peter, Camanho, Pedro P.:
Simulation of the mechanical response of thin-ply composites: from computational micro-mechanics to structural analysis. En: Archives of Computational Methods in Engineering. 2019. Vol. 26. Pag. 1445-1487. https://doi.org/10.1007/s11831-018-9291-2

Areias, Pedro, Carrilho Lopes, José, Santos, M. P., Rabczuk, Timon, Reinoso Cuevas, José Antonio:
Finite strain analysis of limestone / basaltic magma interaction and fracture: Low order mixed tetrahedron and remeshing. En: European Journal of Mechanics A: Solids. 2019. Vol. 73. Pag. 235-247. https://doi.org/10.1016/j.euromechsol.2018.09.003

Jha, Niraj Kumar, Reinoso Cuevas, José Antonio, Dehghani, Hamidreza, Merodio, Jose:
A computational model for fiber-reinforced composites: hyperelastic constitutive formulation including residual stresses and damage. En: Computational Mechanics. 2019. Vol. 63. Pag. 931-948. https://doi.org/10.1007/s00466-018-1630-5

Jha, Niraj Kumar, Reinoso Cuevas, José Antonio, Dehghani, Hamidreza, Merodio, Jose:
Constitutive modeling framework for residually stressed viscoelastic solids at finite strains. En: Mechanics Research Communications. 2019. Vol. 95. Pag. 79-84. https://doi.org/10.1016/j.mechrescom.2019.01.003

Dehghani, Hamidreza, Desena Galarza, D., Jha, Niraj Kumar, Reinoso Cuevas, José Antonio, Merodio, Jose:
Bifurcation and post-bifurcation of an inflated and extended residually-stressed circular cylindrical tube with application to aneurysms initiation and propagation in arterial wall tissue. En: Finite Elements In Analysis And Design. 2019. Vol. 161. Pag. 51-60. https://doi.org/10.1016/j.finel.2019.04.004

Jha, Niraj Kumar, Reinoso Cuevas, José Antonio, Merodio, Jose:
A general non-local constitutive relation for residually stressed solids. En: Mechanics Research Communications. 2019. Vol. 101. Núm. 103421. https://doi.org/10.1016/j.mechrescom.2019.103421

Távara Mendoza, Luis, Reinoso Cuevas, José Antonio, Blázquez Gámez, Antonio M., Mantic Lescisin, Vladislav:
On the 3D extension of failure models for adhesive joints under mixed-mode fracture conditions: LEBIM and CZM. En: Theoretical and Applied Fracture Mechanics. 2019. Vol. 100. Pag. 362-376. https://doi.org/10.1016/j.tafmec.2019.01.004

Guillén Hernández, Teresa, García García, Israel, Reinoso Cuevas, José Antonio, Paggi, Marco:
A micromechanical analysis of inter-fiber failure in long reinforced composites based on the phase field approach of fracture combined with the cohesive zone model. En: International Journal of Fracture. 2019. Vol. 220. Núm. 2. Pag. 181-203. https://doi.org/10.1007/s10704-019-00384-8

Reinoso Cuevas, José Antonio, Durand Neyra, Percy, Ramaiah Budarapu, Pattabhi, Paggi, Marco:
Crack Patterns in Heterogenous Rocks Using a Combined Phase Field-Cohesive Interface Modeling Approach: A Numerical Study. En: Energies. 2019. Vol. 12. Núm. 965. Pag. 1-28. 10.3390/en12060965

Reinoso Cuevas, José Antonio, Paggi, Marco, Areias, Pedro, Blázquez Gámez, Antonio M.:
Surface-based and solid shell formulations of the 7-parameter shell model for layered CFRP and functionally graded power-based composite structures. En: Mechanics of Advanced Materials and Structures. 2019. Vol. 26. Núm. 15. Pag. 1271-1289. 10.1080/15376494.2018.1432802

García, Lorenzo, Távara Mendoza, Luis, Reinoso Cuevas, José Antonio, Justo Estebaranz, Jesús, Paris Carballo, Federico:
Analysis of 3D Printed Trapezoidal Interfaces by Means of a Novel Cohesive-Based Analytical Approach. En: Journal of Multiscale Modeling. 2018. Vol. 9. Núm. 3. 10.1142/S1756973718420015

García, Lorenzo, Távara Mendoza, Luis, Reinoso Cuevas, José Antonio, Justo Estebaranz, Jesús, Paris Carballo, Federico:
Influencia de las interfases estructuradas en la tenacidad a la fractura de uniones adhesivas en especímenes DCB fabricados mediante impresión 3D: estudio experimental y analítico. En: Anales de Mecánica de la Fractura. 2018. Vol. 35. Pag. 427-432

Távara Mendoza, Luis, Reinoso Cuevas, José Antonio, Blázquez Gámez, Antonio M., Mantic Lescisin, Vladislav:
Aspectos Asociados a la Extensión 3d de Modelos de Interfase: Czm y Lebim. En: Anales de Mecánica de la Fractura. 2018. Vol. 35. Pag. 415-420

García, Lorenzo, Távara Mendoza, Luis, Reinoso Cuevas, José Antonio, Justo Estebaranz, Jesús, Paris Carballo, Federico:
Fracture resistance of 3D printed adhesively bonded DCB composite specimens using structured interfaces: Experimental and theoretical study. En: Composite Structures. 2018. Vol. 188. Pag. 173-184. 10.1016/j.compstruct.2017.12.055

Paggi, Marco, Corrado, Mauro, Reinoso Cuevas, José Antonio:
Fracture of solar-grade anisotropic polycrystalline Silicon: A combined phase field¿cohesive zone model approach. En: Computer Methods in Applied Mechanics and Engineering. 2018. Vol. 330. Pag. 123-148. 10.1016/j.cma.2017.10.021

Areias, Pedro, Reinoso Cuevas, José Antonio, Camanho, Pedro Ponces, César Sá, Jose, Rabczuk, Timon:
Effective 2D and 3D crack propagation with local mesh refinement and the screened Poisson equation. En: Engineering Fracture Mechanics. 2018. Vol. 189. Pag. 339-360. 10.1016/j.engfracmech.2017.11.017

Areias, Pedro, Jorge, Renato Natal, Cesar Sa, Jose, Rabczuk, Timon, Reinoso Cuevas, José Antonio:
General constitutive updating for finite strain formulations based on assumed strains and the Jacobian. En: Finite Elements In Analysis And Design. 2018. Vol. 143. Pag. 32-45. 10.1016/j.finel.2018.01.006

Carollo, Valerio, Reinoso Cuevas, José Antonio, Paggi, Marco:
Modeling complex crack paths in ceramic laminates: A novel variational framework combining the phase field method of fracture and the cohesive zone model. En: Journal of the European Ceramic Society. 2018. 10.1016/j.jeurceramsoc.2018.01.035

Távara Mendoza, Luis, Reinoso Cuevas, José Antonio, Castillo, David, Mantic Lescisin, Vladislav:
Mixed-mode failure of interfaces studied by the 2D Linear Elastic-Brittle Interface Model: macro- and micro-mechanical finite element applications in composites. En: The Journal of Adhesion. 2018. Vol. 94. Núm. 8. Pag. 627-656. http://dx.doi.org/10.1080/00218464.2017.1320988

Justo Estebaranz, Jesús, Reinoso Cuevas, José Antonio, Blázquez Gámez, Antonio M., Gómez, B.:
Ensayos de pull-off sobre probetas con rigidizadores en T. En: Materiales Compuestos. 2017. Vol. 1. Pag. 135-141

García Guzmán, L, Reinoso Cuevas, José Antonio, Távara, L:
Estudio experimental de interfases no convencionales con patrones trapezoidales. En: Materiales Compuestos. 2017. Vol. 1. Pag. 92-98

García Guzmán, L, Távara Mendoza, Luis, Reinoso Cuevas, José Antonio, Justo Estebaranz, Jesús, Paris Carballo, Federico:
Estudio experimental de interfases no convencionales con patrones trapezoidales. En: Materiales Compuestos. 2017. Vol. 1. Pag. 92-98

Reinoso Cuevas, José Antonio, Arteiro, Albertino, Paggi, Marco, Camanho, Pedro Ponces:
Strength prediction of notched thin ply laminates using finite fracture mechanics and the phase field approach. En: Composites Science and Technology. 2017. Vol. 150. Pag. 205-216. 10.1016/j.compscitech.2017.07.020

Carollo, Valerio, Reinoso Cuevas, José Antonio, Paggi, Marco:
A 3D finite strain model for intralayer and interlayer crack simulation coupling the phase field approach and cohesive zone model. En: Composite Structures. 2017. Vol. 182. Pag. 636-651. 10.1016/j.compstruct.2017.08.095

Reinoso Cuevas, José Antonio, Catalanotti, G, Blázquez Gámez, Antonio M., Areias, P, Camanho, P.p., et. al.:
A consistent anisotropic damage model for laminated fiber-reinforced composites using the 3D-version of the Puck failure criterion. En: International Journal of Solids and Structures. 2017. Vol. 126-127. Pag. 37-53. 10.1016/j.ijsolstr.2017.07.023

Paggi, Marco, Reinoso Cuevas, José Antonio:
Revisiting the problem of a crack impinging on an interface:A modeling framework for the interaction between the phase field approach for brittle fracture and the interface cohesive zone model. En: Computer Methods in Applied Mechanics and Engineering. 2017. Vol. 321. Pag. 145-172. https://doi.org/10.1016/j.cma.2017.04.004

Budarapu, Pattabhi R., Reinoso Cuevas, José Antonio, Paggi, Marco:
Concurrently coupled solid shell-based adaptive multiscale method for fracture. En: Computer Methods in Applied Mechanics and Engineering. 2017. https://doi.org/10.1016/j.cma.2017.02.023

Justo Estebaranz, Jesús, Reinoso Cuevas, José Antonio, Blázquez Gámez, Antonio M.:
Experimental failure investigation of pull-off tests of single T-stiffened composite specimens. En: Composite Structures. 2017. https://doi.org/10.1016/j.compstruct.2017.04.070

Dean, Aamir, Sahraee , Shahab, Reinoso Cuevas, José Antonio, Rolfes, Raimund:
A new invariant-based thermo-plastic model for finite deformation analysis of short fibre reinforced composites: Development and numerical aspects. En: Composites Part B: Engineering. 2017. A new invariant-based thermo-plastic model for finite deformation analysis of short fibre reinforced composites: Development and numerical aspects

Reinoso Cuevas, José Antonio, Paggi, Marco, Linder, Christian:
Phase field modeling of brittle fracture for enhanced assumed strain shells at large deformations: formulation and finite element implementation. En: Computational Mechanics. 2017. Vol. 59. Núm. 6. Pag. 981-1001

Haldar, Ayan, Reinoso Cuevas, José Antonio, Jansen, Eelco, Rolfes, Raimund:
Thermally induced multistable configurations of variable stiffness composite plates: Semi-analytical and finite element investigation. En: Composite Structures. 2017. https://doi.org/10.1016/j.compstruct.2017.02.014

Dean, a, Sahraee, S, Özenc, K, Reinoso Cuevas, José Antonio, Rolfes, R, et. al.:
A thermodynamically consistent framework to couple damage and plasticity microplane-based formulations for fracture modeling: development and algorithmic treatment. En: International Journal of Fracture. 2017. Vol. 203. Núm. 1. Pag. 115-134. 10.1007/s10704-016-0131-9

Reinoso Cuevas, José Antonio, Paggi, M, Blázquez Gámez, Antonio M.:
A nonlinear finite thickness cohesive interface element for modeling delamination in fibre-reinforced composite laminates. En: Composites Part B: Engineering. 2017. Vol. 109. Pag. 116-128. http://dx.doi.org/10.1016/j.compositesb.2016.10.042

Areias, P, Rabczuk, T, Reinoso Cuevas, José Antonio, De Sa, J César:
Finite-strain low order shell using least-squares strains and two-parameter thickness extensibility. En: European Journal of Mechanics A: Solids. 2017. Vol. 61. Pag. 293-314. http://dx.doi.org/10.1016/j.euromechsol.2016.10.008

Borri, C, Paggi, M, Reinoso Cuevas, José Antonio, Borodich, F M:
Adhesive behaviour of bonded paper layers: Mechanical testing and statistical modelling. En: Proceedings of the Institution of Mechanical Engineers. Part C, Journal of Mechanical Engineering Science. 2016. Vol. 230. Núm. 9. Pag. 1440-1448. https://doi.org/10.1177/0954406215612502

Reinoso Cuevas, José Antonio, Blázquez Gámez, Antonio M.:
Application and finite element implementation of 7-parameter shell element for geometrically nonlinear analysis of layered CFRP composites. En: Composite Structures. 2016. Vol. 139. Pag. 263-276. http://dx.doi.org/10.1016/j.compstruct.2015.12.009

Reinoso Cuevas, José Antonio, Paggi, M, Areias, P:
A finite element framework for the interplay between delamination and buckling of rubber-like bi-material systems and stretchable electronics. En: Journal of the European Ceramic Society. 2016. Vol. 36. Núm. 9. Pag. 2371-2382. http://dx.doi.org/10.1016/j.jeurceramsoc.2016.01.002

Reinoso Cuevas, José Antonio, Blázquez Gámez, Antonio M.:
Geometrically nonlinear analysis of functionally graded power-based and carbon nanotubes reinforced composites using a fully integrated solid shell element. En: Composite Structures. 2016. Vol. 152. Pag. 277-294. http://dx.doi.org/10.1016/j.compstruct.2016.05.036

Dean, a, Sahraee, S., Reinoso Cuevas, José Antonio, Rolfes, J.:
Finite deformation model for short fibre reinforced composites: application to hybrid metal-composite clinching joints. En: Composite Structures. 2016. Núm. 151. Pag. 162-171. http://dx.doi.org/10.1016/j.compstruct.2016.02.045

Távara Mendoza, Luis, Reinoso Cuevas, José Antonio, Estefani Morales, Alejandro, Blázquez Gámez, Antonio M., Mantic Lescisin, Vladislav, et. al.:
Modelo de Interfase Elastica Lineal Fragil (Mielf) Aplicado a Problemas Tridimensionales con Crecimiento de Grietas en Modo Mixto. En: Anales de Mecánica de la Fractura. 2016. Vol. 33. Pag. 1-6

Reinoso Cuevas, José Antonio, Blázquez Gámez, Antonio M., Távara Mendoza, Luis, Paris Carballo, Federico, Arellano, Carlos:
Damage tolerance of composite runout panels under tensile loading. En: Composites Part B: Engineering. 2016. Vol. 96. Pag. 79-93. http://dx.doi.org/10.1016/j.compositesb.2016.03.083

Reinoso Cuevas, José Antonio, Paggi, Marco, Rolfes, Raimund:
A computational framework for the interplay between delamination and wrinkling in functionally graded thermal barrier coatings. En: Computational Materials Science. 2015

Hühne, Sina, Reinoso Cuevas, José Antonio, Jansen, Eelco, Rolfes, Raimund:
A two-way loose coupling procedure for investigating the buckling and damage behaviour of stiffened composite panels. En: Composite Structures. 2015

Areias, Pedro, Reinoso Cuevas, José Antonio, Camanho, Pedro Ponces, Rabczuk, Timon:
A constitutive-based element-by-element crack propagation algorithm with local mesh refinement. En: Computational Mechanics. 2015. Vol. 56. Núm. 2. Pag. 291-315

Paggi, Marco, Reinoso Cuevas, José Antonio:
An Anisotropic Large Displacement Cohesive Zone Model for Fibrillar and Crazing Interfaces. En: International Journal of Solids and Structures. 2015. Vol. 69-70. Pag. 106-120

B.a, Behrens, Rolfes, Raimund, Vucetic, M, Peshekhodov, I, Reinoso Cuevas, José Antonio, et. al.:
Material characterization for FEA of the clinching process of short fiber reinforced thermoplastics with an aluminum sheet. En: Advanced Materials Research. 2014. Vol. 966-967. Pag. 557-568. 10.4028/www.scientific.net/AMR.966-967.557

Reinoso Cuevas, José Antonio, Paggi, Marco:
A Consistent Interface Element Formulation for Geometrical and Material Nonlinearities. En: Computational Mechanics. 2014. Vol. 54. Núm. 6. Pag. 1569-1581

Reinoso Cuevas, José Antonio, Blázquez Gámez, Antonio M., Estefani Morales, Alejandro, Paris Carballo, Federico, Cañas Delgado, José:
A composite runout specimen subjected to tension-compression loading conditions: Experimental and global¿local finite element analysis. En: Composite Structures. 2013. Vol. 101. Pag. 274-289. http://dx.doi.org/10.1016/j.compstruct.2012.12.056

Reinoso Cuevas, José Antonio, Blázquez Gámez, Antonio, Estefani Morales, Alejandro, París Carballo, Federico, Cañas Delgado, José, et. al.:
Experimental and three-dimensional Global-Local Finite Element analysis of a composite component including degradation process at the interface. En: Composites Part B: Engineering. 2012. Vol. 43. Núm. 4. Pag. 1929-1942. 10.1016/j.compositesb.2012.02.010

Blázquez Gámez, Antonio, Reinoso Cuevas, José Antonio, París Carballo, Federico, Cañas Delgado, José:
Postbuckling behavior of a pressurized stiffened composite panel - Part II: Numerical analysis. Effect of the geometrical imperfections. En: Composite Structures. 2012. Vol. 94. Núm. 5. Pag. 1544-1554. 10.1016/j.compstruct.2011.12.013

Reinoso Cuevas, José Antonio, Blázquez Gámez, Anonio, París Carballo, Federico, Cañas Delgado, José, Meléndez, Juan Carlos:
Postbuckling behavior of a pressurized stiffened composite panel - Part I: Experimental study. En: Composite Structures. 2012. Vol. 94. Núm. 5. Pag. 1533-1543

Reinoso Cuevas, José Antonio:
Revisiting the problem of a crack impinging on an interface:A modeling framework for the interaction between the phase field approach for brittle fracture and the interface cohesive zone model

Reinoso Cuevas, José Antonio:
Concurrently coupled solid shell-based adaptive multiscale method for fracture

Reinoso Cuevas, José Antonio:
A new invariant-based thermo-plastic model for finite deformation analysis of short fibre reinforced composites: Development and numerical aspects

Aportaciones a Congresos

Blázquez Gámez, Antonio M., Justo Estebaranz, Jesús, Reinoso Cuevas, José Antonio, Paris Carballo, Federico:
Procedure for the Estimation of the Shape Imperfections of a Composite Panel in order to Reproduce its Postbuckling Evolution. Ponencia en Congreso. 18th European Conference on Composite Materials. Atenas, Grecia. 2018

Távara Mendoza, Luis, Reinoso Cuevas, José Antonio, Blázquez Gámez, Antonio M., Mantic Lescisin, Vladislav:
A computational implementation of 3D mixed-mode fracture criteria which are invariant with respect to the reference system. Ponencia en Congreso. 22nd European Conference on Fracture. Belgrado, BELGRADE, BELGRADE (SERBIA). 2018

García, Lorenzo, Távara Mendoza, Luis, Reinoso Cuevas, José Antonio, Justo Estebaranz, Jesús, Paris Carballo, Federico:
Enhancing the Fracture Toughness of Adhesively Bonded Joints using 3D Printed Structured Interfaces. Ponencia en Congreso. 18th European Conference on Composite Materials. Atenas, Grecia. 2018

García, Lorenzo, Távara Mendoza, Luis, Reinoso Cuevas, José Antonio, Justo Estebaranz, Jesús, Paris Carballo, Federico:
3D Printed structured interfaces to improve fracture properties of bonded joints. Ponencia en Congreso. 15th European-Japanese Meeting on Composite Materials. Londres, Reino Unido. 2017

Blázquez Gámez, Antonio M., Reinoso Cuevas, José Antonio, Paris Carballo, Federico:
Damage simulations in a composite ¿-stiffened panel in postbuckling regime. Comunicación en congreso. 17th European Conference on Composite Materials (ECCM17). Munich (Germany). 2016

Reinoso Cuevas, José Antonio, Paggi, M, Blázquez Gámez, Antonio M.:
A finite thickness interface element for composite delamination. Comunicación en congreso. 17th European Conference on Composite Materials (ECCM17). Munich (Germany). 2016

Távara Mendoza, Luis, Mantic Lescisin, Vladislav, Reinoso Cuevas, José Antonio, Estefani Morales, Alejandro, Paris Carballo, Federico:
Fibre-matrix debonds in unidirectional fibre-reinforced composites under biaxial transverse loads. Ponencia en Congreso. 11th International Conference on Multiaxial Fatigue and Fracture. Sevilla, España. 2016

Reinoso Cuevas, José Antonio, Távara Mendoza, Luis, Mantic Lescisin, Vladislav, Paris Carballo, Federico:
Three dimensional FE analysis of interfacial fibre/matrix debonding in fibre-reinforced composites. Ponencia en Congreso. eXtended Discretization MethodS. Ferrara, Italia. 2015

Estefani Morales, Alejandro, Reinoso Cuevas, José Antonio, Távara Mendoza, Luis:
Estudio de despegues entre fibra y matriz en un material compuesto usando una subrutina de usuario UMAT. Ponencia en Congreso. XI Congreso Nacional de Materiales Compuestos. Móstoles (Madrid). 2015

Reinoso Cuevas, José Antonio, Blázquez Gámez, Antonio M., Paris Carballo, Federico:
Análisis de postpandeo de un panel rigidizado de material compuesto mediante técnicas de modelado mul-ti-global-local incluyendo daño interlaminar. Comunicación en congreso. XI Congreso Nacional de Materiales Compuestos. Móstoles (Madrid). 2015

Gómez, Blanca, Reinoso Cuevas, José Antonio, Justo Estebaranz, Jesús, Blázquez Gámez, Antonio M.:
Failure analysis of skin-stringer interfaces. Comunicación en congreso. 16th European Conference on Composite Materials, ECCM 2014. Sevilla. 2014

Pastorino, Daniel, Blázquez Gámez, Antonio M., Reinoso Cuevas, José Antonio, Paris Carballo, Federico:
Composite plates modeling strategies for the estimation of transverse stresses. Comunicación en congreso. 16th European Conference on Composite Materials ECCM16. Seville, Spain. 2014

Estefani Morales, Alejandro, Blázquez Gámez, Antonio M., Reinoso Cuevas, José Antonio, Paris Carballo, Federico, Cañas Delgado, José:
Failure analysis of a CFRP run-out configuration with butt-strap joint. Comunicación en congreso. 16th European Conference on Composite Materials. 2014

Blázquez Gámez, Antonio M., Reinoso Cuevas, José Antonio, Cañas Delgado, José, Paris Carballo, Federico:
Análisis de la capacidad postpandeo de un panel rigidizado ante cargas de presión. Comunicación en congreso. X Congreso Nacional de Materiales Compuestos. ALgeciras, Cádiz. 2013

Reinoso Cuevas, José Antonio, Blázquez Gámez, Antonio M., Paris Carballo, Federico, Irslinger, J, Ramm, e:
On different shell modeling in numerical analyses of a composite stiffened panel under uniform pressure. Comunicación en congreso. 10th World Conference on Computation Mechanics. Campinas, Sao Paulo, Brasil. 2012

Blázquez Gámez, Antonio M., Reinoso Cuevas, José Antonio, Paris Carballo, Federico, Estefani Morales, Alejandro, Arévalo, e, et. al.:
Analysis of a stringer run-out concept including damage initiation and evolution at the interfaces. Ponencia en Congreso. 15th EUROPEAN CONFERENCE ON COMPOSITE MATERIALS. Venecia, Italia. 2012

Reinoso Cuevas, José Antonio, Blázquez Gámez, Antonio M., Paris Carballo, Federico:
On the use of three dimensional material laws in the analyses of functionally graded shells. Ponencia en Congreso. 15th EUROPEAN CONFERENCE ON COMPOSITE MATERIALS. Venecia, Italia. 2012

Reinoso Cuevas, José Antonio, Blázquez Gámez, Antonio M., Estefani Morales, Alejandro, Paris Carballo, Federico, Cañas Delgado, José, et. al.:
Mechanical response of a composite stiffner runout specimen including damge processes at the skin-stringer interfaces. Comunicación en congreso. 1st International Conference on Mechanics of Nano Micro and Macro Composite Structures. Turín, Italia. 2012

Reinoso Cuevas, José Antonio, Blázquez Gámez, Antonio M., Paris Carballo, Federico, Ramm, e:
Implementation of composite 7-parameters formulation of shell elements applying user subroutine UEL. Comunicación en congreso. 16th International Conference on Composite Structures. Oporto, Portugal. 2011

Blázquez Gámez, Antonio M., Reinoso Cuevas, José Antonio, Paris Carballo, Federico, Cañas Delgado, José:
Análisis de postpandeo de un panel rigidizado de material compuesto sometido a carga de presión. Comunicación en congreso. IX Congreso Nacional de Materiales Compuestos. Barcelona-Gerona. 2011

Reinoso Cuevas, José Antonio, Blázquez Gámez, Antonio, París Carballo, Federico, Ramm, Ekkehard:
Implementation of composite 7-parameter formulation of shell elements applying user subroutine UEL. Comunicación en congreso. International Conference in composite Structures 16. Oporto, Portugal. 2011

Reinoso Cuevas, José Antonio, París Carballo, Federico, Cruz, Francisco, Blázquez Gámez, Antonio M.:
Influence of the modelization of frames on the analysis of a compressed cylindrical stiffened panel. Comunicación en congreso. International Conference in composite Structures 16. Oporto, Portugal. 2011

Reinoso Cuevas, José Antonio, Blázquez Gámez, Antonio M., Estefani Morales, Alejandro, Paris Carballo, Federico, Cruz Domínguez,Francisco:
Comparación de las Opciones Submodeling y Coupling Shell-to-Solid en Análisis Global-Local de un Elemento de Material Compuesto Incluyendo la Degradación de Interfaces. Comunicación en congreso. Reunión de Usuarios de Simulia. 2010. Actas de la XV Reunión de Usuarios de Simulia. 1. 15

Reinoso Cuevas, José Antonio, Blázquez Gámez, Antonio M., Paris Carballo, Federico:
Analisis Numerico de Postpandeo de Paneles Rigidizados de Material Compuesto. Comunicación en congreso. Comatcomp 09. San Sebastian. 2009. Actas del VIII Congreso Nacional de Materiales Compuestos. 907. 910

Reinoso Cuevas, José Antonio, Blázquez Gámez, Antonio M., Paris Carballo, Federico:
Analisis Numerico de Pandeo de Paneles Rigidizados de Material Compuesto. Comunicación en congreso. Comatcomp 09. San Sebastian. 2009. Actas del VIII Congreso Nacional de Materiales Compuestos. 963. 966

Tesis dirigidas y co-dirigidas:

(Doctorando no grabado)
Phase-Field Modeling of Damage and Fracture in Fiber Reinforced Composites. Tesis Doctoral. 2020

Guillén Hernández, Teresa:
Computational Fracture Mechanics for Reliability of Composites at the Micro and Macro Scales. Tesis Doctoral. 2020

García, Lorenzo:
Mechanical behaviour of structured joints in 3D printed composite components: experimental, analytical and numerical study. Tesis Doctoral. 2020

Quintana Corominas, Adrià:
Damage events in fobre reinforced composites: Supercomputation and novel numerical techniques. Tesis Doctoral. 2019

Carollo, Valerio:
A Variational approach to brittle fracture and cohesive delamination: modeling and technological applications. Tesis Doctoral. 2018